Ethernet and PoE - compact

DL-1G-POE-INJECTOR

Order number: A06620

RJ45 + SV connectors

two-stage surge protection device for Ethernet protection, combined with PoE protection including the injector
installed at the entry point into the building object, near the equipment to be protected, at the interface of the LPZ 0 and LPZ 1 and higher zones
for use in Ethernet Cat. 6 lines with PoE (Power over Ethernet), operating in A and B modes, to protect them from peak overvoltages

Technical parameters

Parameter name		Parameter value
Type of SPD		D1,C2,C3
Location of SPD		ST 1+2+3
Mounting		DIN rail 35 mm
Maximum operating voltage	U_c	8.50 V DC
Maximum operating voltage POE	U_c	58.00 V DC
Nominal load current per core at 25 °C	I_L	0.5 A
Treshold frequency core-core	f	250.00 MHz
Insertion attenuation at treshhold frequency		1.20 dB
D1 total discharge current (10/350 µs) cores-PE	I_Total	2.00 kA
C2 nominal discharge current (8/20 µs) per core	I_n	0.15 kA
C2 total discharge current (8/20 µs) cores-PE	I_Total	10.00 kA
C2 voltage protection level mode (POE) at In = 1,25 kA	U_c	90.00 V
C2 voltage protection level mode core-PE at In = 1,25 kA	U_p	700.00 V
C2 voltage protection level mode core-core at In	U_p	70 V
C3 voltage protection level mode (POE) at 1 kV/µs		80.00 V
C3 voltage protection level mode core-PE at 1 kV/µs	U_p	500 V
C3 voltage protection level mode core-core at 1 kV/µs	U_p	80 V
Response time core-core	t_a	1 ns
Response time core-PE	t_a	100 ns
Connection (input - output)		RJ 45/RJ 45
Degree of protection		IP 20
Range of ambient temperatures (min/max)		-40 / 80 °C
Humidity		5 - 95 %
According to standard		EN 61643-21+A1,A2:2013, IEC 61643-21+A1,A2:2012
Customs tariff number		85363030
EAN		8595090566205